Robert Keeley True-Bypass Looper
Connect any effect to this unit that is "old school" and not true-bypass. In particular Vintage wahs, echoes, phasers, fuzz face type pedals, etc., or even new effects that might have a weak bypass system. These elderly effects rob tone when they are off. Now You can make them truly bypassed when off with this little box. Works with or without power. When you add a DC supply to this unit the two LED let you know if the loop is active or not. BLUE LED indicates your signal is passing through the vintage effect, RED LED indicates true-bypass. STOP TONE DRAIN!
|
Features:
Make an effect or group of effects True-Bypass
Use as a tuner switch to mute during tuning
Use as an effects looper switcher, switch in multiple effects!
Operates with or without power
Dual LED indicators to let you know what mode you are in
Resistors added to keep “switch pop” to a minimum
Stamped Serial Number
|
|
